GRABADOR TASCAM DR-10CH
216,72€ IVA Incluido
¿Lo has visto más barato? Clica aquí
GRABADOR TASCAM DR-10CH
- Micro grabador de audio con conectores mini XLR 4 pin para micros lavalier Shure.
- Grabación mono/poly PCM Linear a 44.1/48 kHz, 16/24 bits en tarjeta microSD/microSDHC (hasta 32Gb).
- Formato de grabación WAV (compatible con BWF).
- Limitador para prevenir picos.
- Filtro pasa bajo, 4 ajustes de nivel de grabación.
- Función de control automático de nivel disponible.
- Grabación dual con pista de seguridad en caso de distorsión.
- Reproducción inmediata de archivos grabados.
- Salida de auriculares.
- Pantalla OLED de alto contraste fácil de leer.
- Conector micro USB-B para transmisión de datos.
- Graba 10 horas con una sola pila alcalina AAA (Evolta).
- Se pueden crear ajustes desde el ordenador y transferirlos al grabador vía USB.
- Actualización de firmware vía tarjeta microSD.
- Incluye clip de cinturón y estuche a medida para almacenaje de la unidad y accesorios.
GRABADOR TASCAM DR-10CH
Especificaciones
General | |
---|---|
Recording media | microSD card (64 MB – 2 GB) microSDHC card (4–32 GB) |
Recording/playback formats | BWF-compatible WAV format, 44.1/48 kHz, 16/24 bits, mono/poly MP3 format, 44.1/48 kHz, 128/192 kbit/s (recording) 32–320 kbit/s (playback) |
Inputs and outputs | |
---|---|
Analogue input (microphone) | DR-10CS (for Sennheiser): 3.5-mm mini TRS jack (with screw lock) DR-10CH (for Shure): Mini XLR 4-pin male |
Maximum input level | –12 dBV |
Minimum input level | –53 dBV |
Mic input gain | 10 dB to 35 dB (according to MODEL SELECT setting) |
Input impedance | 33 kΩ or higher |
Analogue output (passed to the transmitter) | DR-10CS (for Sennheiser): 3.5-mm mini TRS jack (with screw lock) DR-10CH (for Shure): Mini XLR 4-pin male |
Analogue output (Headphones jack) | 3.5-mm mini stereo jack (dual mono audio output) |
Audio performance, input to phones output | |
---|---|
Frequency response | 20 Hz – 22 kHz, +1/-3 dB |
Distortion | 0.05 % (1 kHz sine wave, maximum input level) |
S/N ratio | 88 dB or higher (PHONES level max., MIC GAIN set to LO) |
Power supply and other specifications | |
---|---|
Power supply | 1 AAA battery (alkaline, NiMH or lithium) USB bus power from a computer |
Power consumption | 0.45 W (maximum) |
Current consumption (USB bus power) | 0.25A (maximum) |
Date and time data retention | Secondary lithium battery (built-in) |
Dimensions (W × H × D) | 52 x 56 x 25 mm (excluding protrusions) |
Weight | 63 g (with battery) 51 g (without battery) |
Permissible operating temperature range | 0-40 °C |
Battery operation time | |
---|---|
Conditions: WAV recording at 48 kHz/24 bit, continuous operation, JEITA recording times, in hours: minutes | |
Alkaline battery (Evolta) | |
10:00 | Microphone and transmitter connected, headphones not connected, mic bias off, limiter off, dual recording off |
9:30 | Only microphone connected, headphones not connected, mic bias on, limiter off, dual recording off |
NiMH battery (Eneloop) | |
8:00 | Microphone and transmitter connected, headphones not connected, mic bias off, limiter off, dual recording off |
7:30 | Only microphone connected, headphones not connected, mic bias on, limiter off, dual recording off |
Lithium battery (Energizer Ultimate Lithium) | |
15:30 | Microphone and transmitter connected, headphones not connected, mic bias off, limiter off, dual recording off |
14:30 | Only microphone connected, headphones not connected, mic bias on, limiter off, dual recording off |
Para más información del producto: