Caja Pasiva JBL Control 25-1L Blanca (Pareja)

484,00 IVA Incluido

¿Lo has visto más barato? Clica aquí

Sin existencias

CAJA PASIVA JBL CONTROL 25-1L BLANCA (PAREJA)

Caja todo-rango de 2 vías compacta, woofer de 5 1/4″, tweeter PEI de 3/4″, con difusor 100 x 100 . Potencia Programa: 200W; Potencia Continua 100H: 75 W a 8Ohm. Sensibilidad 90 dB (1W / 1m). Respuesta en frecuencia de 85 Hz a 17 KHz. Caja IP44 resistente a radiacion Ultra Violeta con rejilla galvanizada.

Disponible opción IP55 montando MTC-25WMG-1 WeatherMax opcional. Acabado en color negro. Incluye soporte de rótula InvisiBall. Dimensiones: 243x188x145 mm. Peso: 3,0 kg. Color BLANCA.
SKU: CONTROL25-1L-WH Categorias: , ,

Caja Pasiva JBL Control 25-1L Blanca (Pareja)

Características - Especificaciones del producto

Caracteristicas

Frequency Response (-10dB) 60 Hz to 20 kHz
Frequency Response (±3 dB) 85Hz – 17 kHz
Power Rating 200 W Continuous Program (2 hrs) *Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor. Continuous Program Power is defined as 3 dB above the Continuou Pink Noise Rating and is a conservative expression of the system’s ability to handle normal speech and music program material.
Maximum Input Voltage 25.3 V RMS (2 hrs), 50.6 V peak
Maximum SPL (1m) 110 dB ave. Continuous Pink Noise (116 dB peak) *Calculated from sensitivity and power handling, exclusive of power compression.
Sensitivity 90 dB, 1W/1m (ave. 100 Hz – 10 kHz) *Half-space (on-wall) averaged 100 Hz – 10 kHz, 2.83V.
Coverage Angle 100° x 100° *Coverage angle (-6 dB) average between 1 kHz and 12 kHz.
Directivity Factor (Q) 6.04 (averaged 1kHz – 16kHz)
Directivity Index (DI) 7.6dB (averaged 1kHz – 16kHz)
Impedance 8 ohms
Crossover Type 2nd order low-pass, 3rd order high-pass
Recommended Protective High-Pass 60 Hz high-pass (24 dB/oct) *For protection against driving below resonant frequency and to keep transformer out of saturation.
Drivers LF: 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
HF: 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
Enclosure High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
Grille Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
Installation InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
Outdoor Capability IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
Input Connectors Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
Safety Agency ROHS-compliant
Colors Black (RAL9004) or white (-WH, RAL9016)
Dimensions (H x W x D) 243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket. *In vertical orientation
Net Weight (each) 3.0 kg (6.7 lbs)
Shipping Weight 7.3 kg (16.0 lbs) for the pair-pack (for 2 speakers)
Included Accessories InvisiBall™ wall-mounting system, 6 mm x 100 mm hex key
Optional Accessories MTC-25UB-1 – Yolk-type U-bracket (&-WH)
Mounting Hardware InvisiBall™ aimable wall-mounting system included. Optional U-bracket.

 

Para más información del producto:

https://jblpro.com/en-US/products/control-25-1l

Main Menu

Estamos usando cookies en nuestro sitio web

Esta web solo instalará cookies propias de carácter técnico y funcional necesarias para el funcionamiento del sitio web y la prestación de servicios expresamente solicitados por el usuario. No se instalan cookies analíticas, de publicidad ni de afiliación de terceros.

AUDIO CB es el Responsable del tratamiento de los datos del Interesado y le informa de que estos datos serán tratados de conformidad con lo dispuesto en el Reglamento (UE) 2016/679, de 27 de abril de 2016 (GDPR)

Para mas información lea nuestra Política de cookies